Step 3.
a) Attach the other metal side frame (P2) to the table top (P1) and metal rail (P3) as shown below image 3.
b) Securely tighten all bolts with Allen wrench(H5), make sure the table is leveled and aligned properly. Turn the
assembled table to an upright position. Assembly is complete.
Failure to follow these instructions may cause
the bolts to misalign during assembly.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO ENSURE THAT ALL
HARDWARE IS KEPT TIGHTENED.
Step 2. Attach the metal rails (P3) to the metal side frame (P2) as shown on below image 2.
(H1)x2
(H4)x2
(H3)x2
(H5)x1
(H1)x4
(H2)x4
(H4)x8
(H3)x8
(H5)x1
Image 2
Image 3
