Step 5.
1) Attach one end of Front Stretcher (E) to the Front Leg (D) at the left, then repeat the assembly step 4 to attach
another Front Legs (D) to the right side of Seat Frame (C) and attach with another end of the Front Strechers (E).
2) Make sure all pre-drilled holes at all stretchers downwards, then fully tighten all Bolts (a,b,c) with Allen Wrench (f)
3) Fully tighten all the Screws (g) that securing Stretchers (E,F) to the legs.
Step 6.
1) Turn assembled stool over to an upright position.
2) Assembly is completed.
Failure to follow these instructions may result in misalignment of the bolts during assembly.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERDAY USE. THEY SHOULD
BE PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK
TO ENSURE THAT ALL HARDWARES ARE MAINTAINED TIGHTENED.
Thank you for your purchase
Page 4 of 4
