MadgeTech VFC2000-MT, Product User Manual, Page: 3 / 4

Product User Guide | 3
VFC2000-MT
PRODUCT USER GUIDE
Recalibration
Recalibration is recommended annually or bi-annually for
any data logger; a reminder is automatically displayed in
the software when the device is due. To send devices back
for calibration, visit
madgetech.com
.
Device Maintenance
Battery Replacement
Materials:
U9VL-J Battery or any 9 V Battery (lithium
recommended)
1. On the bottom of the data logger, open the battery
compartment by pulling in on the cover tab.
2. Remove the battery by pulling it from the
compartment.
3. Install the new battery, taking note of the polarity.
4. Push the cover closed until it clicks.
Product Support & Troubleshooting:
• Refer to the Troubleshooting section of this document.
• Visit our Knowledge Base online at
madgetech.com/resources
.
• Contact our friendly Customer Support Team at (603) 456-2011 or support@madgetech.com .
MadgeTech 4 Software Support:
• Refer to the built-in help section of the MadgeTech 4 Software.
• Download the MadgeTech 4 Software Manual at
madgetech.com
.
• Contact our friendly Customer Support Team at (603) 456-2011 or
support@madgetech.com
.