Product User Guide | 2
TransiTemp-EC
PRODUCT USER GUIDE
Product Overview
The TransiTemp-EC temperature data logger is designed
for high volume, low cost in-transit recording. It has
a custom molded case with a handle for convenient
attachment and comes in single and multi-use versions.
Installation Guide
Installing the Software
The Software can be downloaded from the MadgeTech
website at
. Follow the instructions
provided in the Installation Wizard.
Installing the Docking Station
IFC203 (sold separately)
— Follow the instructions
provided in the Installation Wizard to install the USB
Interface Drivers. Drivers can also be downloaded from the
MadgeTech website at
Ordering Information
• 901749-00 — TransiTemp-EC
• 901752-00 — TransiTemp-EC-Multi
• 900313-00 — IFC203 Interface Cable
• 900036-00 — CR2032 Replacement Battery
Device Operation
Connecting and Starting the Data Logger
1. Once the software is installed and running, plug the
interface cable into the data logger.
2. Connect the USB end of the interface cable into an
open USB port on the computer.
3. The data logger will automatically appear under
Connected Devices
within the software.
4. For most applications, select
Custom Start
from
the menu bar and choose the desired start method,
reading rate and other parameters appropriate for the
data logging application and click
Start
.
(
Quick Start
applies the most recent custom start options,
Batch
Start
is used for managing multiple loggers at once,
Real Time Start
stores the dataset as it records while
connected to the logger.)
5. The status of the device will change to
Running
,
Waiting to Start
or
Waiting to Manual Start
,
depending upon your start method.
6. Disconnect the data logger from the interface cable
and place it in the environment to measure.
Note:
The device will stop recording data when the end of memory
is reached or the device is stopped. At this point the device cannot be
restarted until it has been re-armed by the computer.
Downloading Data from a Data Logger
1. Connect the data logger to the computer with the
interface cable.
2. Highlight the data logger in the
Connected Device
s
list. Click
Stop
on the menu bar.
3. Once the data logger is stopped, with the logger
highlighted, click
Download
.
4. Downloading will offload and save all the recorded
data to the PC.