background image

RFCO

2

RHTemp2000A

Product Maintenance

Battery Replacement

Materials:

 U9VL-J Battery

1. 

On the bottom of the enclosure, open the battery compartment by pulling in on the 
cover tab.

2. 

Remove the battery by pulling it from the compartment.

3.

 Install the new battery, taking note of the polarity.

4.

 Push the cover closed until it clicks.

Recalibration

The RFCO

2

RHTemp2000A standard calibration is one point at 25 °C for the temperature 

channel, two points at 25 %RH and 75 %RH for the humidity channel and the CO

2

 channel 

is verified at fresh air level. (verification point of 70 ppm or 5 % of the reading.)

Recalibration is recommended annually for any MadgeTech data logger; a reminder is
automatically displayed in the software when the device is due.

Pricing:

Recalibration traceable to NIST  

$300.00

 

RMA Instructions

To send a device back in to MadgeTech, follow the instructions below to create an RMA 
(Return Merchandise Authorization) on the MadgeTech website:

1.

 Visit 

www.madgetech.com

, under the 

Services

 tab select 

RMA Process

.

2.

 When the web page opens, please sign in. If this is the first time, select 

Click here to 

register an account

 and create one. Once signed in, click on the 

Make New RMA

 

button and fill in all the blank fields. 

3.

 Complete the applicable fields on the form including customer Billing and Shipping 

information, even if they are the same. Please see the field explanation below for a more 
detailed description about questions asked in the Device Information section.

4.

 When all of the fields are complete, click 

Generate RMA

.

5.

 Print out the confirmation page that follows containing the RMA number and 

MadgeTech’s address for shipping. 

A Return Merchandise Authorization must be 

accompanied by a copy of the RMA paperwork and shipping is prepaid by the 
customer

. The RMA number should be clearly marked on the outside of the package.

6.

 Please ship the package via UPS, FedEx, TNT, or DHL to the address listed on the 

confirmation page. USPS will not ship MadgeTech data loggers.

7.

 A notification email will be automatically sent when MadgeTech has received the RMA.

Countries approved for use, purchase and distribution of the RFCO

2

RHTemp2000A:

Australia, Austria, Belgium, Bulgaria, Canada, Chile, China, Columbia, Croatia, Cyprus, Czech Republic, Denmark, 
Ecuador, Estonia, Finland, France, Germany, Greece, Honduras, Hungary, Iceland, Ireland, Israel, Japan, Latvia, 
Liechtenstein, Lithuania, Luxembourg, Malta, Mexico, New Zealand, Norway, Peru, Poland, Portugal, Romania, 
Saudi Arabia, Singapore, Slovakia, Slovenia, South Africa, South Korea, Spain, Sweden, Switzerland, Thailand,  
The Netherlands, Turkey, United Kingdom, United States, Venezuela, Vietnam

5

Summary of Contents for RFCO2RHTemp2000A

















Reviews: