Chapter 2
Installing the Backup PSU
100-240-01
15
Insta
lling the
Backup
PSU
Connecting the Backup PSU to the AC outlet
To connect the Backup PSU to the AC outlet:
1
Take the mains power cables provided in the Backup PSU package.
2
The rear panel of the Backup PSU has two AC mains sockets (see Figure 2.1). Each of the
sockets corresponds to a PSU Module in the Backup PSU. Connect one end to the AC mains
socket that corresponds to the PSU Module that will supply power to the Collage 740.
3
Connect the other end to the AC outlet.
Hazard:
Only connect the power cable to a correctly wired and earthed receptacle.
4
Switch on the power.
!
install.fm4 Page 15 Tuesday, August 13, 1996 2:05 PM
