Coin training
The coin acceptor in your machine is either empty or has
already been trained on Madeforarcade coins. If the coin
acceptor is empty and the machine is not set to free
playa sample coin must first be placed in the coin
acceptor.
You can do this by first opening the back of the machine
with the corresponding key.
Then you will see a slider with a blue sticker on the right.
You can carefully lift this up.
There is a shallow slot at the bottom where you can slide
a coin in/between. Do this while holding the slider up.
When your coin is in the slot, you can slowly and
carefully lower the slide with the coin in between.
Then close the back of the machine again with the
corresponding key.Finally, put another coin through the
coin slot on the side from the machine. Please note, use
the same type of coin as the coin in the slot at theslider
is seated.
When inserting a coin, the coin acceptor compares the
inserted coin with the sample coin. If the coins are equal,
the inserted coin is removed to the cash drawer and a
credit is counted in the user display.
Only insert coins with a diameter of 18 to 25 mm. and
a thickness of 1.6 to 2 mm.
Made for arcade - handleiding bartop arcade Mrt 2023 -- Pagina : 11
