14 / 33
3.1.2.2.Transmitter functions
The JUPITER X Transmitter consists of:
Three synthesized power generators
A monitoring unit for the internal components which :
Detects any faults in the transmission circuits (over-
currents or low currents) and indicates which clamp is
concerned.
Monitors the discharge level of the battery
– the
transmission is automatically stopped if the battery
reaches a discharge level that could affect its life time.
A front face
– instrument panel with 4 different zones:
Faults zone
S1 or S2 signal selection button
ON/OFF button
Battery zone : Battery charge indicator and protection
fuse
A plug for charging the battery
3.1.2.3.Transmitter connection
The transmitter is connected on the near end of the cables using
the current clamps on the connection case. Both cable ends are
short-circuited and can be earthed (Do not include the cable
screen).
Ensure that both cable ends are short-circuited, using the
appropriate connection wires.
The loop located at the end of the short circuit
must be connected to the security padlock
