Page 2
For technical questions, please call 1-888-866-5797.
58918
Specifications
Construction
Steel
Tire Size Capacity
Tires up to 42″ 14-ply tires with drop-center rims.
Dimensions
L 6″ x W 4.4″ x H 10″
Net Weight
10 Lb.
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMPORTANT SAFETY INFORMATION
Read all safety warnings and instructions.
Failure to follow the warnings and instructions
may result in serious injury.
Save all warnings and instructions
for future reference.
When using tool, basic safety
precautions should always be followed
to reduce the risk of personal injury
and damage to equipment.
1. Always wear ANSI approved impact
safety goggles and
heavy-duty work gloves during use.
2. Release air pressure from
tire by removing valve core
from stem before use.
3. Use as intended only.
4.
Check for damaged parts
. Before
using any tool, any part that appears
damaged should be carefully checked
to determine that it will operate
properly and perform its intended
function. Check for alignment and
binding of moving parts; any broken
parts or mounting fixtures; and any
other condition that may affect proper
operation. Any part that is damaged
should be properly repaired or
replaced by a qualified technician.
5.
Keep work area clean
. Cluttered
areas invite injuries.
6.
Observe work area conditions
. Do
not use machines or power tools in
damp or wet locations. Don’t expose
to rain. Keep work area well lit. Do not
use electrically powered tools in the
presence of flammable gases or liquids.
