Page 4
For technical questions, please call 1-888-866-5797.
Item 58814
SA
FE
TY
OP
ERA
TI
O
N
MAINT
ENANC
E
IN
ST
ALLA
TI
O
N
Bead Seater Safety Warnings
1.
Do not use more than 40 psi to seat bead. Do
not pressurize tank to more than 120 psi.
2.
Wear ANSI-approved safety goggles, heavy-duty
work gloves and hearing protection during use.
3.
Use as intended only.
4.
Do not drop Bead Seater.
5.
Read manual before set up and/or use.
6. Risk of injury - do not direct air
stream at people or animals.
7. Do not use to supply breathing air.
8. To prevent injury keep hands away from
tire and rim when using Bead Seater.
9. Fill Bead Seater with air only. Other
gases can cause asphyxiation.
10. Drain Tank daily and after use. Internal rust causes
tank failure and explosion.
11. Remove air in Tank before storing.
12. The use of accessories or attachments not
recommended by the manufacturer may
result in a risk of injury to persons.
13. Industrial applications must follow OSHA guidelines.
14. Maintain labels and nameplates on the
Bead Seater. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
15. This product is not a toy.
Keep it out of reach of children.
SAVE THESE INSTRUCTIONS.
