Page 4
For technical questions, please call 1-888-866-5797.
63728
Bearing Installation from Rear of Knuckle
1. Choose an appropriate sized Plate
(001 or 002) and Bushing (1-13).
2. Use Bolt (19), two Washers (20) and Nut (16).
With an appropriately sized Bushing and Plate
to construct the installation assembly.
Bolt (19)
Washer (20)
Bushing
New Bearing
(not included)
Plate
Washer (20)
Nut (16)
Rear
FWD (Face)
Knuckle
3. Clean inside of knuckle.
4. Place Washer, Bushing and New Bearing
(not included) onto Bolt.
5. Place Bolt, Washer, Bushing and New Bearing
assembly into rear of knuckle, ensure New Bearing
will be installed in the correct position.
6. Place Plate onto Bolt end with larger
flat side against knuckle.
7. Place Washer and Nut onto Bolt end.
8. Hold Bolt head with wrench (not included) and
turn Nut to set New Bearing into knuckle.
9. Remove assembly from knuckle.
Bearing Installation From Face of Knuckle
1. Choose an appropriate sized Plate
(001 or 002) and Bushing (1-13).
2. Use Bolt (19), two Washers (20) and Nut (16).
With an appropriately sized Bushing and Plate
to construct the installation assembly.
Bolt (19)
Washer (20)
Bushing
New Bearing
(not included)
Plate
Washer (20)
Nut (16)
Rear
FWD (Face)
Knuckle
3. Clean inside of knuckle.
4. Place Washer and Plate onto Bolt, ensure larger
flat side of Plate is facing away from Bolt head.
5. Place Bolt, Washer and Plate
assembly into rear of knuckle.
6. Place New Bearing (not included), Bushing,
Washer and Nut onto Bolt end, ensure New
Bearing will be installed in the correct position.
7. Hold Bolt head with wrench (not included) and
turn Nut to set New Bearing into knuckle.
8. Remove assembly from knuckle.
Hub Installation
1. Choose two appropriate sized Bushings
for hub installation. Refer to Application
Chart on page 5-11.
2. Use the Bolt (19), two Washers (20), Nut (16) and
two Bushings to set up hub installation assembly.
3. Hold Bolt head with wrench (not included)
and turn Nut to set hub into place.
4. Remove assembly from housing.
Bolt (19)
Washer (20)
Bushing
Hub (not included)
Bushing
Washer (20)
Nut (16)
Rear
Knuckle
FWD (Face)
