15
3 Use
ElecTo SONIC is ideal for domestic and in-
dustrial usage and, thanks to the absence
of moving parts, it is resistant to wear and
ensures constant functioning over time.
The measurements taken by the meter are
shown cyclically on the display and are also
available on other communication interfac-
es.
The water meter is not suitable for installa-
tions where the water is particularly heavy,
sandy, rich in algae, sludge and debris, or
contains air.
The normal operating phase is remote me-
ter reading through radio modules. In AMR
(fixed) mode, each radio module (wMBus
and/or LoRaWAN) transmits the reading at
a programmable frequency.
In mobile mode (Walk-By/Drive-By), the ra-
dio module wMBus emits a data frame with
the measurements. To receive the radio
module signal, hold a suitable receiver near
the meter. The fixed (AMR) system reads
data automatically.
l
WARNING!
Data can be read using a variety
of software. Please refer to the
accounting manager for specific
usage information on the reading
software.
l
WARNING!
It is recommended to keep the lid
closed once the installation steps
are completed.
4 Configuration
ElecTo SONIC is supplied with a default
configuration.
The radio is activated after the passage of
10 litres of water.
The NFC programming interface is available
at all times by positioning the special set-
tings kit above the designated area. The to-
tal available cumulative programming time
is 18 hours.
NFC Area
The radio settings, such as the type of ra-
dio frame and data transmission frequen-
cy, have a default factory setting. However,
they can be changed, if necessary, after
making the device programmable, via the
appropriate kit:
– App ElecTo SONIC (Android, downloada-
ble from Google Play Store);
– Smartphone with NFC or UniCo Tool inter-
face.
For further information, contact the manu-
facturer.
The app allows the following parameters to
be read and programmed:
– Radio settings
– Radio AES key
– Periodic reading
– Alarms setting
– Alarms reset
– Date/time synchronization
– Delivery point
Summary of Contents for ElecTo SONIC
Page 18: ...18 8 Compliance declaration ...
Page 19: ...19 ...
