MadBoy F-LOUD 370, Owner'S Manual

Page: 9 / 72

WWW.MADBOY-AUDIO.COM
Connecting the Speakers
Insert the plug tightly into the
terminal Tighten the terminal by
turning it clockwise Profile
Connecting the speaker with a banana plug
CHANNEL A CHANNEL B
S
P
E
A
K
E
R
O
U
T
P
U
T
S
Connecting the speaker with the Speakon cable
OPEN
CLOSE
Loose the terminal
by turning it
counterclockwise Insert the stripped end of the
speaker cable into the
terminal Strip 10mm from
the end of the cable
Twist the stripped wire
Connecting the speaker with speaker wire
Tighten the speaker
terminal by turning it
clockwise
1 2 3 4
1 2 3
How to connect the Speakon cable:
Push the speakon cable into the speakon
connector and close it by turning clockwise.
How to remove the Speakon cable:
Open the speakon connector by pulling
release lever backwards and turning it
counterclockwise.
9
Notice! Speakon and binding post connectors are connected in parallel. Minimum speaker
impedance is 8 if both Speakons and binding posts are used same time. Ω