Page 4 of 5
405-0680
10/28/2019
MR0100
MAD-MOUNT
Installation Instructions
Figure 1
Storing the MAD-RAMPS Pivoting Ramp System
STEP 1:
Ensure both ramps are locked into the off-road travel position. Remove the retainer clip from the
driver’s side of the Pivot Bar, and then slide the Driver-Side Pivot Cage and Aluminum Ramp off of the
MAD-RAMPS frame and set it aside. Reinsert the retainer clip into Pivot Bar. Repeat the process for
the Passenger-Side Pivot Cage and Aluminum Ramp.
STEP 2:
Disconnect the electrical plug that connects the MAD-RAMPS lighting cord to your truck.
STEP 3:
Remove the receiver pin from the receiver hitch on your truck. Disconnect the MAD-RAMPS frame
from your truck by sliding the frame’s main arm out of the receiver hitch.
STEP 4:
Hang the MAD-RAMPS frame on the Lower Mounting Plate (with the top-side of the frame facing the
wall) by placing the Pivot Bar on the lower plate’s two hooks, as shown in Figure 2. Ensure that the
MAD-RAMPS frame is centered on the Lower Mounting plate for even weight distribution. Please
note that the receiver end of the frame’s main arm should be facing the ground.
