16
17
2. Then place the other leg
(A)
parallel to the first and connect it with piece
B
, using the four
E
bolts.
CAUTION! TIGHTEN THE BOLTS GENTLY. EXCESSIVE USE OF FORCE MAY DAMAGE THE COMPONENTS AND BOLTS!
3. Gently turn the partially twisted rack upside down. Connect elements
A
and
B
with component
N
. Use
E
bolts for that.
4. Place the top
(C
) gently on a clean floor. Position the rack so that the space for screws in the top is aligned with the holes in the
rack. Use
K
bolts. The table top should be screwed so that the curved edge is on the same side as the thicker part part of the leg.
