ENGLISH
ENGLISH
When you play in the multi-player mode WITH a Multi-Port:
If you want to play with the Multi-Port, you should set each controller in the same
way as listed above – Plug in and confirm each controller one by one.
RESETTING THE CONTROLLER
On a rare occasion, two or more controllers may be set to the same ID and
may interfere with each other, preventing each controller from working properly.
Additionally, another RF source (such as a 900 MHz wireless phone) may cause
interference. If this should happen, reset the controller as follows:
1. Disconnect the Antenna Receiver from the game console.
2. Press [START] and [SELECT] and [MODE] buttons on the Lynx at the same time
and hold for two seconds – then release the buttons – the [MODE] button should
begin to flash.
3. Press and hold the [RESET] button on the Antenna Receiver – While holding
the [RESET] button, insert Antenna Receiver into the game console – Release the
[RESET] button on the Antenna Receiver when the [MODE] button stops flashing
on the Lynx controller (allow several seconds for the Lynx and Antenna Receiver
to establish a link.)
CAUTIONS
- IMPORTANT
! Before using this product read all accompanying information and
your game system’s instruction manual for safety, health and other information.
- To prevent fire or shock hazard, do not expose this unit to rain or moisture. Do
not use within 30’ of any water such as swimming pools, bathtubs, or sinks.
- To avoid electrical shock, do not disassemble. Refer servicing to qualified
personnel only.
- This unit should be operated only from the power source indicated on the unit. If
you are not sure of the type of electrical power supplied to your home, contact
your local power company.
- Never push objects of any kind, other than authorized items, into the product
as they may touch dangerous voltage points or short out parts that could result
in fire or electrical shock.
- Stop using this unit immediately if you begin to feel tired or if you experience
discomfort or pain in your hands and/or arms while operating the unit. If the
condition persists, consult a doctor.
- Do not attempt to operate the unit in any way except with your hands. Do not
bring the unit in contact with your head, face, or near the bones of any other
part of your body
- The vibration function of this unit can aggravate injuries. Switch off or do not use
the vibration function of the unit if you have any ailment of the bones or joints
of your hands or arms.
- Avoid prolonged use of this unit. Take breaks every 30 minutes.
- Use this unit only as intended.
- Do not dispose of batteries in fire. Refer to local country, state and city guidelines
for appropriate methods of battery disposal.
- Do not put batteries into unit backwards.
- Misuse of batteries within this unit may cause batteries to leak and/or explode
and lead to personal injury.
- This product contains small parts that may cause choking if swallowed. Not
intended for children under 3 years of age.
TROUBLESHOOTING
Problem:
The Lynx controller does not respond.
Solution:
Make sure the batteries are fully charged.
Solution:
Reset the controller – Refer to “RESETTING THE CONTROLLER”
Solution:
Make sure the receiver is fully plugged in to the PlayStation
game console.
Problem:
The Lynx controller does not vibrate.
Solution:
Check the game to make sure that the game is “Vibration Function
Compatible”.
Solution:
Change the control mode to Analog. Not all games will instruct the
controller to vibrate unless it is in Analog Mode.
Solution:
Check the options menu in the game. Some games require the
vibration function to be turned on.
5
6
