Macurco
TM
DVP-1200 Manual
REV – 1.3.1
[34-8708-4770-7 ]
33
|
P a g e
Figure 4-21 –
If a horn/strobe is already assigned as a dedicated alarm, warning, or trouble (see Section 4.6.1.2.2.3 CONFIGURE H/S), it will
not be able to be added to the zone configuration and vice-versa. In the example below, H/S 1 has already been assigned as a
dedicated alarm. Attempting to add it to the Zone 1 configuration results in an error message. Similarly, if a Horn/Strobe is
assigned to a zone then it cannot be assigned to alarm, warning, or trouble.
Figure 4-22 –
4.6.2.4
GROUP CONFIG.
Menu path: Main Menu-->CONFIGURE SYSTEM? -->MANUAL CONFIGURE? -->CONFIGURE ZONES? -->ADD/EDIT ZONES-->GROUP
CONFIG. -->
Each group of sensors can be configured with settings unique to each zone.
For example, Group 1 sensors (CO gas) ALARM could be set to 200ppm in Zone 1 and 100ppm in Zone 2.
To configure the sensor groups within each zone, select GROUP CONFIG. from the zone configuration menu and press ENTER. To
view or change values for a sensor type, select SENSOR TYPE and press ENTER.
Summary of Contents for DVP-1200
Page 2: ......
Page 5: ...MacurcoTM DVP 1200 Manual REV 1 3 1 34 8708 4770 7 4 P a g e ...
Page 60: ......
Page 67: ......
