Macurco DVP-1200, Manual

Page: 32 / 68

Macurco TM DVP-1200 Manual
REV – 1.3.1 [34-8708-4770-7 ] 31 | P a g e
Figure 4-16 –
To assign a relay to the zone, select ADD RELAY and press ENTER. Input the relay number and press ENTER. The relay will be
added to the zone and the display will return to the RELAYS menu with the bottom box of the display updated to reflect the
changes made.
To delete a relay, select DELETE RELAY from the RELAYS menu and press ENTER. Input the relay number to delete and press
ENTER (to delete all relays assigned to the zone, input “0” and press ENTER). The relay(s) will be deleted from the zone and the
display will return to the RELAY menu with the bottom box of the display updated to reflect the change made.
Figure 4-17 –
Relay assigned as Alarm Relay cannot be added to a zone. If an attempt to add an alarm relay to a zone is made, then it will
display an error message “CANNOT ADD RELAY. DEDICATE FOR ALARM” as shown in Figure 4-18.
Figure 4-18 –