PM150-CO2 Portable Gas Monitor
REV – 1.0
[34-2900-0211-5]
4
|
P a g e
1
General Information
The PM150-
CO₂ is a portable single gas detector designed to detect the presence of
carbon dioxide gas in ambient
environment. When activated, PM150-
CO₂
continuously monitors ambient air for the presence of carbon dioxide gas
and alerts the user to potentially unsafe exposure with LED, vibrating, and audible alarms if gas concentration exceeds
alarm set points. The settings value can be adjusted manually or by connecting to the PC software.
2
Specifications
2.1
PM150-CO2 Specifications
Model
PM150-CO2 Detector
Sensor Type
Nondispersive infrared (NDIR)
Measurement
Diffusion type
Display
LCD display
Audible
90dB at 10cm
Warning Lamp
Red Flashing LEDs
Vibration
Vibration Alarm
Battery
Rechargeable Li-ion (polymer) power supply unit (500mAh)
Charging Time
100 minutes from empty battery to fully charge based on power off
state and charging with adaptor
Temperature
-20ºC to +50ºC
Humidity
5% to 95% RH (Non-condensing)
Case
Rubber Enclosure
Accessories
Calibration Cap, Charging Cable (USB C-Type) and Adaptor
Calibration Flow Rate
Flow rate: 0.2 LPM (N2, CO2)
Size
2.13” (W) x 3.92” (H) x 1.53” (D) (54 mm x 99.5 mm x 38.8 mm)
Weight
4.76 oz (135 g)
Operating Life
14 days (Expected) (in measuring mode without alarm)
Event Log
Recent 30 alarms
Approval
EMC Directive (2014/30/EU), ROHS
2.2
Sensor Specification
Gas
Measuring range
Low Alarm
High Alarm
Resolution
CO2
0-5.0% vol
0-50,000 ppm
0.5% vol
5,000 ppm
1% vol
10,000 ppm
0.01% vol
100 ppm
