Macurco AimSafety PM150-CO2, User Instructions

Page: 18 / 22

PM150-CO2 Portable Gas Monitor
REV – 1.0 [34-2900-0211-5] 18 | P a g e
9.2 Window menu
9.2.1 Menu – File
9.2.2 Menu – Tools
9.2.3 Menu – Device
9.2.3.1 Menu – Device
•
Load(L) – Load the installed settings
•
Save(S) – Save the current settings
•
Exit(X)
– Finish the work and exit the
program
•
Calibration(C) – Open the calibration
window to start calibration process
•
Log Read(R) – Retrieve and save the log
events
•
Log Erase(E)
– Remove all the logs from the
device’s memory (erased logs cannot be
recovered)
•
FW Upgrade(U)
– Open the firmware upgrade
window to start upgrading process
•
Self- Test(S) – Automatic self diagnostics of the
unit
Test order: LED → Beep → Vibration Motor → Flash
→ Sensor → End
•
Factory Default(F)
– Reset original settings and
specifications
•
Time Write(T) – To set the local time
based on device settings
•
Power OFF(P) – Turn off the device
•
IAP Version Read(I)
•
Now Time – When the “Now Time” button is
clicked, the PC time will be set in the device. The
initial time set in the instrument is based on the
factory time zone. The time will need to be updated
to reflect the current time zone that the instrument
will be used in.
•
Time Write –
Click the “Time Write” button to use
the customized time selected.