Installation
Hardware Installation
The FunPad pro computer game controller uses USB technol-
ogy to interface with your computer. USB is a “hot-swappable”
technology, meaning you can connect peripherals to the computer
while the power is on. However, to protect the sensitive electrical
components inside your computer (and inside the FunPad pro),
we recommend turning your computer’s power off before
connecting the FunPad pro. After turning off your computer,
please follow these steps:
1. Plug the FunPad pro’s USB connector firmly into an avail-
able USB port of your computer.
(NOTE: On most Apple computers, the USB ports can be found
on the keyboard or in the back panel of the computer. If
all ports are occupied, you may need to plug the FunPad
pro’s USB connector— and any other USB devices cur -
rently connected to your computer—into a USB hub. Then
connect this hub to one of the newly vacated computer
ports).
2. After plugging the FunPad pro’s connector into your com-
puter’s USB ports (or into a hub), turn your computer’s
power on and proceed to the next section in this manual-
“Software Installation.”
3
