Pairing and connecting with a Bluetooth device
Every time the headphone is switched on, it will connect to the last
connected device automatically. When the headphone is in standby mode
and doesn’t connect to any HFP devices, short press MFB button once, it
will connect to last connected source device automatically.
To enter pairing mode, make sure the headphone is powered off then
press and hold the MFB key about 6 seconds until the headphone prompts
4 ascending tones and after a while 2 more tones and the status indicator
LED blinks red and blue alternately. From the Bluetooth function of the
device to be paired search for new device named “M-HPB30”. Select it and if
requested enter “0000” passcode. When pairing is completed successfully
the indicator LED blinks blue and the headphone prompts two tones. If
the pairing procedure is not successful, please switch off the headphone
and repeat the above steps. The specific pairing procedure may vary, so
please refer to your device user manual for further information. When in
pairing mode, if no device is paired within 2 minutes, the headphone will
return to standby mode automatically.
Re-connecting with a Bluetooth device
To adjust the headphone volume during a call
or while listening to music press the volume
up or down keys. When the volume is turned
to maximum or minimal levels, one tone is
prompted. Please remember that excessive
sound pressure from headphones can damage
your hearing.
Adjust the Volume
-6-
EN
Manuale di istruzioni M-HPB30 red_ ENG-IT.indd 6
09/04/2013 12:25:29
