System setup
Changing the picture quality and setting the frequency of FM transmitter
Accessing the menu
To adjust the picture, use the menu button to select the features you would like
to adjust. Adjustment selections are as follows.
1. Press and hold MENU on the remote control for more than one second.
The Operation Menu opens.
2.
Press MENU repeatedly to select one of the following settings, then press
the < and > button to change the value:
The features are:
Contrast:
Adjust the contrast of the picture
Brightness:
Adjust the brightness of the picture
Color:
Adjust the color of the picture
Tint:
Adjust the tint of the picture (it is only available in NTSC system)
Wide Screen:
Selects display Mode: Wide (16:9)/ Normal (4:3)
Note: In Wide mode, normal images are stretched horizontally and are
displayed over the entire screen. In Normal mode, normal images are not
stretched, and displayed without distortion.
LAC Enable
:
Low angle compensation, if it is on, the picture looks like very
smooth
FMT Freq:
you can select the frequency for FM transmitter: 88.1, 88.3, 88.5,
88.7, 88.9, 89.1, 9.3, 89.5, 89.7 MHz and 89.9 MHz regarding to the frequency
of your radio receiver or FM headphone,
RESET
: Reset menu to default value
23
Summary of Contents for M-DVD902RV
Page 1: ...E nglish...
