- 9 -
Bluetooth mode
Pairing
The bluetooth of this radio is always in standby mode for pairing and connection, signalled by a
blinking bluetooth icon on the LCD Display. At this blinking time, please run the bluetooth search
and connect function in your cellphone. The car radio model no “M-DL3000” will be shown on the
cellphone. Select this car radio and connect to finish the pairing. The bluetooth icon on the display
will be on indicating that the connection is established. Bluetooth function is ready to use. *Pairing
password is required in some phones. Insert “0000” in such case.
Calling
In any play mode, dial the desired number on your cellphone. The unit will switch to bluetooth
handsfree mode automatically. “CALL OUT” will be shown on the display indicating the dialling is
in progress.
Answer calls
When there is an incoming call, the LCD will display the CALL IN prompt followed by the caller
number display. At this time, after pressing the “answer button”, the current talk time status
will be displayed. Rotate the volume knob during ringing or conversation to adjust the respective
volume level.
Rejecting calls
During ringing or conversation, press the “EJECT” button to end the call or reject the call. “CALL
END” will be shown on the display and the unit will resume to the original play mode.
BT Audio streaming (A2DP)
Press MOD/(with green phone logo) button until the unit entered BT AUDIO.
BT audio will play automatically when you play the song in the cellphone.
You could pause by “
> / II
” button, to choose previous or next song by pressing
|<<
and
>>|
button.
Disconnecting
Disconnect the paired phone by operating on the cellphone. You cannot process disconnection on
the car radio headunit.
Setting
Illuminations
The RGB menu has the following illuminations LED modes:
(AUTO)
>
(WHITE)
>
(PURP)
>
(CYAN)
>
(YELL)
>
(RED)
>
(BLUE)
>
(GREE).
(Factory default is LED AUTO). Press VOL knob repeatedly to enter the menu LED AUTO.
Rotate VOL to choose the color of your favorite light.
Steering Wheel Control
Press the volume knob repeatedly until the display shows SWRC. Rotate the volume knob to see
(MODE)
>
(VOL+)
>
(VOL-)
>
(MUTE)
>
(SEEK UP)
>
(SEEK D)
>
(EJECT)
>
(ACCEPT),
which represents different functions of the radio. In each function, press the volume knob to enter
SWC learning, for example, press the volume knob when the display shows MODE.
When PAIR is shown, press and hold the desired button in the steering wheel until display shows
PAIR OK. Proceed to the next function until all desired functions are set.
Note:
During the SWC setup, if the unit is idle for 5 seconds, the unit will return to the main GUI and user
has to repeat the above actions again.
M-DL3200 User manual_ENG.indd 9
23/07/2018 15:29:19
