- 9 -
Bluetooth Mode
Communication
1. Select the BT audio source by repeatedly pressing the MODE button. The display shows the
message “NO DEVICE”.Activate the Bluetooth function on your mobile phone and select the
name of the Bluetooth device “M-DL3000DAB”
2. Wait until the last connection is complete, the unit display shows “PAIRED” and the name of
your device.
Operation
1. Incoming call telephone numbers will be displayed on the LCD. Press the green colour mark
button to receive the call and when the call is fi nished, press the red colour mark button to
hang up.
Pressing the green key forwards the last called number.
2. Select BT MUSIC mode to activate the A2DP mode (Streaming Audio). Activate the music
function on your device and adjust the phone level to the maximum output and press Play to
start audio playback.
Notes:
* Some phones do not support BT function and Bluetooth Music mode (A2DP).
* To manually reconnect or disconnect a device, select the RE-CON or DIS-CON function from
the menu using the MENU button.
DAB Radio
Functions
1. Press MOD repeatedly on the main unit to select DAB.
2. In DAB mode, press the MENU button to browse through the menu items as follows:
SCAN> 12V ON / OFF> PRESS> DIS-CON> CLK> BEEP> RESET.
Operation
SCAN:
Press the key (1) to select the SCAN function, confirm the scan by pressing the key (2) .
The system will scan all available DAB stations.
The display will display the number of stations received and the first receiving station will be play.
Press and hold for about 2 seconds to store the desired station in the preset buttons (1 to 6).
Press briefly to recall the stored station.
Press
◀◀
/
►►
repeatedly until the desired channel / frequency is displayed.
12V ANTENNA ON / OFF:
Select ON when using an amplified DAB antenna with 12V power supply voltage.
Select OFF when using the passive DAB antenna or external power supply.
PRUNE: ???
M-DL3000DAB
1
1 to 6
2
M-DL3000 User manual_ENG.indd 9
26/06/2017 10:38:28
