Macro Sensors LVC-2500, User Manual

Page: 5 / 28

2.0 Installation
Manual Part No. 0653 0003 0000 Rev B
2.0 Installation
4
Before mounting the LVC, please refer to section 2.10.
Hook the LVC on the DIN rail with the release clip facing down and push onto the rail until a ‘click’ is heard.
To remove, use a screwdriver to lever the release clip down. Pull the bottom of the housing away from the rail and unhook.
To access internal links, the front cover and PCB must be withdrawn from the housing. Use a screwdriver or similar tool to
depress the top latch. The cover will spring forward. Repeat with the bottom latch, then gently pull the PCB out.
2.1 Mounting and Access
DIN Rail Withdraw PCB
1 2
4
3
Cover Release Latch