DC-SATA User Guide
If the system
doesn’t recognise
the drive, turn on
the power first,
before connecting
the interface cable
or connect the
device before
booting your
Operating System.
For the safe
removal of your
drive and to assure
that no data is lost,
always follow the
unplug procedure.
Installation on a Macintosh
If the drive has been pre-installed and setup already, you do
not need to prepare anything else and can use the unit straight
away. If you have installed the drive yourself and this is a brand
new HDD, you will have to create a partition first and format the
drive before it will show up.
•
Turn on your computer and start Mac OS
•
Connect the Daisy Cutter and turn it on
•
No driver installation required
•
The external drive will mount and show up on your desktop
For factory new drives and more info about formatting, see
following pages under “Partitioning & Formatting”.
Removal Procedure
•
Drag the external hard drive icon into the trash bin
•
Turn off your device
Page 9 / Chapter 3 - System Set Up
