Your unit might
come with an
installed hard drive.
Before opening
such an enclosure,
please read the
warranty and any
other notes from
your vendor
carefully before
doing so, as this
might void your
warranty.
Chapter 2 - Installing the HDD
Preparing the Enclosure
Remove the 2 screws for the back panel (not mounted if factory
new), remove the cover and use the hook to pull out the bridge
board. There is a hole in the circuit board, use that or in case of
the Clearlight 400+ version, you may gently pull on the USB
connector.
Copyright © 2000-2003 by Macpower Peripherals Ltd. - www.macpower.com.tw
- 4 -
