2
1
T
> 2/3*T
> 50
30
WINDOWS
· DOORS · SLIDING DOORS
Packer profile cross-section
Example
1
Threshold
2
Packer profile / sub-structure
IMPORTANT!
The threshold with frame
must be packed along
the entire length.
The load must be carried
by the packer profile!
IMPORTANT!
The length of the packer
profile must be flush on
both sides with the frame
outer edge.
IMPORTANT!
The width of the packer
profile must be a
minimum of 2/3 of the
threshold depth, but no
less than 50 mm.
The inner edge of the
threshold must be flush
with the packer profile.
IMPORTANT!
Country specific require
-
ments and guidelines for
floor construction must
be considered.
IMPORTANT!
The fixing must be done
through the aluminium
area of the threshold!
