Maco HS Profine PremiDoor 76 PVC, Assembly Instructions Manual, Page: 9 / 32

9
The resistance to wind loads in the closed and locked state depends on the respective construction of the
windows and balcony doors. If wind loads in accordance with DIN EN 12210 (in particular test pressure p3) are
to be expected, suitable hardware are to be selected and agreed on separately in conjunction with the
respective window construction and the frame material.
The defined maximum sash weights for the individual hardware designs must not be exceeded.
The component with the lowest permissible load capacity determines the maximum sash weight. Application
diagrams and component mappings must be observed.
The hardware and the rebate spaces must be sufficiently ventilated, especially during the construction phase,
so that they are not exposed to direct moisture or condensation.
The hardware are to be kept free of deposits and contamination by building materials (construction dust,
gypsum plaster, cement etc.), therefore windows must be covered accordingly.
The hardware must only be cleaned or polished with mild, pH-neutral detergents in diluted form.
Attach the operating label in a clearly visible manner to the built-in lift and slide sash. The operating label is
located in the basic box or in the „corner deflection“ package.
Improper use
The respective hardware system may only be assembled with hardware components from the MACO slide
hardware range. In the event of improper installation of the hardware and/or the use of non-original or
non-factory approved system accessories, no liability will be accepted.
Do not use vinegar-based or acid-curing sealants, as these can lead to corrosion of the hardware parts. Further
information on MACO surfaces can be found on our website
www.maco.eu or in brochure Order No. 49510 (in
the download area).
The lift and slide elements may only be surface treated before the hardware is installed. Any subsequent
surface treatment may restrict the functionality of the hardware. In this case, no warranty claims against the
hardware manufacturer shall be accepted.
Protect the hardware from damage by angular or sharp tools.
If you are not sure, please ask your MACO contact person for advice.