ELECTRIC DIAGRAM
TROUBLE SHOOTING
If your heater fails to operate, please follow these instructions:
Ensure that your circuit breaker or fuse is working properly.
Be sure the heater is plugged in and that the electrical outlet is working properly.
If the ON/OFF switch is not illuminated at ON position, send it to a service center for
reparation directly.
NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR HEATER, PLEASE SEE THE
WARRANTY INFORMATION FOR INSTRUCTIONS. PLEASE DO NOT ATTEMPT TO OPEN OR
REPAIR THE HEATER YOURSELF. DOING SO MAY VOID THE WARRANTY AND COULD
CAUSE DAMAGE OR PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS, PLEASE
CONTACT THE DISTRIBUTOR.
CLEANING AND STORAGE
Before cleaning your heater, switch off the heater and allow it to cool.
Disconnect the electricity supply to the appliance. The outside can be cleaned
by wiping it over with a soft damp cloth and then dried. Do not use abrasive
cleaning powders or furniture polish, as this can damage the surface finish. To
release the heater from the wall, for cleaning or redecoration, just open the
