996553
–
Revision A
P a g e
|
3 of 17
Introduction
Welcome to the Mackworth TX Ceiling Track Hoist Commissioning and Decommissioning Manual, this manual includes the
TX440 and TX600 variants. Here it will explain on how to successfully install the Hoist into a pre-existing Ceiling Track safely and
securely, as well as how to remove the Hoist from the Track. Use the contents page for easier navigation around the manual to
discover the required section. The aim of the manual is that to help and assist you, so that you can provide a successful
installation and removal of the hoist for the satisfaction and safety of the customer.
The Mackworth TX is available in different configerations dependent on track profile. The track profiles are shown below:
When Commissioning the Mackworth TX Hoist, one of the above track profiles should match the track the hoist is about to be
installed into.
To ensure the hoist available is compatable with the pre-installed track, refer to the table below.
This following guide covers the following TX Models:
Hoist Type
Track Type
TX440
–
122515
Type 1
TX440
–
122516
Type 2
TX440
–
122517
Type 3
TX440
–
122518
Type 4
TX440
–
122519
Type 5
TX600
–
122520
Type 1
TX600
–
122521
Type 2
TX600
–
122522
Type 3
TX600
–
122523
Type 4
TX600
–
122524
Type 5
Type 1
Type 2
Type 3
Type 4
Type 5
Table 1
