995562 – Revision A
Page
19
of
21
7.8 – Leg
Within this section it will explain the correct procedure on removing and reinstalling the Legs
for servicing procedures or replacement. The below information is relevant to both legs on
the product.
Removal
Step 1 – Remove the Foot Tray from the product. (Refer to section 7.4)
Step 2 - Place the Transfer Aid on its side for easier service.
Step 3 – Remove the Manual Leg Rods from the Base. (Refer to section 7.7)
Step 4 – Using two 5mm Allen Keys, remove one of the screws from the Leg Pivot Pin
Step 5 – Remove the Leg Pivot Pin to release the Leg from the Base.
Step 6 – Remove the Leg from the Base.
