background image

Thump18S P

o

w

e

red Sub

w

oof

er

16

Thump18S Powered Subwoofer

Thump18S Subwoofer Specifications

Appendix C: Technical Information

Acoustic Performance:

Frequency Response (–3 dB)  

40 Hz – 120 Hz

Frequency Response (–10 dB) 

30 Hz – 132 Hz

Max peak SPL 

 

 

130 dB

Crossover 

Point 

  140 

Hz

Slope 

 

 

2nd order HP, 6th order LP 

Transducer

Woofer Diameter   

 

18 in / 457 mm

Voice Coil Diameter 

 

3.0 in / 76 mm

Cone 

Material 

  Paper

Magnet 

Material 

  Ferrite

 
 

Power Amplifier

Rated Power 

 

 

600 watts rms 

    1200 

watts 

peak

Rated 

THD 

  < 

1%

Cooling 

   Convection

Design 

   Class 

D

 

Input/Output

Input Type 

 

Female XLR balanced  

 

Input Impedance   

20 k  balanced,    

 

   20 

k  unbalanced

Full Range Outputs 

Male XLR balanced

High Pass Outputs  

Male XLR impedance balanced

 
 

Line Input Power

US detachable line cord 

100 – 120 VAC, 50 – 60 Hz, 150W

EU detachable line cord 

220 – 240 VAC, 50 – 60 Hz, 150W

AC Connector 

 

3-pin IEC 250 VAC, 10 A male

Power Supply Type  

Switchmode

 
 
 
 

Safety Features

Input Protection   

Peak and RMS limiting, 

 

   power 

supply 

and 

amplifier 

 

 

   thermal 

protection

Display LEDs 

 

Front and rear power ON,  

   Rear 

OL 

limiter

 

Construction Features

Cabinet   

 

Exterior grade 15 mm plywood

Finish 

  Textured 

black 

catalyzed 

 

   polyurethane 

paint

Handles   

 

One on each side 

 

Physical Properties

Height 

 

 

26.5 in / 672 mm

Width 

 

 

22.6 in / 573 mm

Depth 

 

 

22.8 in / 580 mm 

Weight   

 

82 lb / 37.2 kg

 

Mounting Methods

The Thump18S subwoofer is designed to sit on the floor or 
stage. It is NOT designed to be pole-mounted or suspended.  
The cabinet has no rigging points and is not suitable for rigging. 
Never attempt to suspend the Thump18S by its handles.

Options

Thump18S Cover   

 

P/N 2036809-25

SPM200 Loudspeaker Pole Mount 

P/N 2035170-01 

 

Disclaimer

Since we are always striving to make our  products better by 
incorporating new and improved materials, components, and 
manufacturing methods, we reserve the right to change these 
specifications at any time without notice.

The “Running Man” figure is a registered trademark of LOUD 
Technologies Inc.

All other brand names mentioned are trademarks or  registered 
trademarks of their respective holders, and are hereby  
acknowledged.

©2014 LOUD Technologies Inc. 
All Rights Reserved.

Summary of Contents for Thump18S



























Reviews: