2/8 PAGES
Thump12
Thump15
1000W
Powered Loudspeakers
THUMP12 / THUMP15 TECH SPECS
Acoustic Performance
Frequency Response (–3 dB)
57 Hz – 20 kHz [Thump12]
39 Hz – 20 kHz [Thump15]
Frequency Response (–10 dB)
50 Hz – 23 kHz [Thump12]
32 Hz – 23 kHz [Thump15]
Horizontal Coverage Angle
90˚
Vertical Coverage Angle
60˚
Maximum SPL Peak
125 dB SPL @ 1m [Thump12]
126 dB SPL @ 1m [Thump15]
High-Frequency Section
Compression Driver
1.4 in / 36 mm
Diaphragm Material
Titanium
Magnet Material
Ferrite
Low-Frequency Section
Woofer Diameter
12.0 in / 305 mm [Thump12]
15.0 in / 381 mm [Thump15]
Cone Material
Paper
Magnet Material
Ferrite
Power Amplifiers
System Power Amplification
Rated Power
500 watts rms
1000 watts peak
Low Frequency Power Amplifier
Rated Power
400 watts rms
800 watts peak
Design
Class D
High Frequency Power Amplifier
Rated Power
100 watts rms
200 watts peak
Design
Class AB
Input / Output
Input Type
Female XLR / 1/4" Balanced
Input Impedance
20 k balanced bridging;
10 k unbalanced
Thru
Male XLR balanced
Level Control
Rotating Knob
0 dB at center
Sensitivity
+4 dBu for full output
(Level Control @ Center)
–36 dBu for full output
(Level Control @ Max)
Electronic Crossover
Crossover Type
24 dB/octave
Crossover Frequency
3 kHz
Equalization
Low Frequency EQ
±6 dB @ 80 Hz, shelving
Mid Frequency EQ
±6 dB sweepable from
100 Hz to 8 kHz
High Frequency EQ
±6 dB @ 12 kHz, shelving
Power
US detachable line cord
100 – 120 VAC, 50 – 60 Hz, 130W
EU detachable line cord
220 – 240 VAC, 50 – 60 Hz, 130W
AC Connector
3-pin IEC 250 VAC, 10 A male
Power Supply Type
Switchmode
Operating Temperature
0 - 40 ˚C
[extended ambient temperature]
32 - 104 ˚F
Safety Features
Input Protection
Peak and RMS limiting,
power supply and
amplifier thermal protection
Display LEDs
Front / rear power ON,
Rear OL (Overload)
