4
6
Carefully remove the led PCB assembly
from the back side of the front panel. A
fl athead screwdriver may aid in removal
of the led PCB assembly if it is sticking.
5
Use the phillips head screwdriver to
remove one screw from the center of the
led PCB assembly.
7
The hard part is done, the rest is
easy! Place new led PCB assembly
(part #0007334) where the old one
was. Follow the same steps as above,
but backwards 6 to 1. Power up the
SWA1801z and led should light up.
Congratulations, you just replaced an
led PCB assembly...now go play some
shows!
Led PCB replacement continued:
