5
Woofer replacement:
1
Follow steps 1-4 of led PCB replacement,
as the front panel will need to be
removed in order to access the woofer.
2
Eight screws need to be removed from
the woofer using 5mm allen wrench.
3
Keep the eight screws in a safe place.
+
-
8
1
2
3
4
5
6
7
4
Carefully begin to remove the woofer.
Caution:
woofer is approximately 27
pounds with weight unevenly distributed.
*
5
Positive (solid yellow) and negative
(yellow and black) cables are still
attached to woofer terminals.
*
*
These two pictures were taken during an SWA1501 woofer repair.
Same principle applies to the SWA1801.
