2/9 PAGES
SRM350v3
SRM450v3
1000W High-Definition
Powered Loudspeakers
SRMv3 LOUDSPEAKER SPECIFICATIONS
Acoustic Performance
Frequency Response (–3 dB)
55 Hz – 20 kHz [SRM350v3]
47 Hz – 20 kHz [SRM450v3]
Frequency Response (–10 dB)
50 Hz – 23 kHz [SRM350v3]
42 Hz – 23 kHz [SRM450v3]
Max peak SPL
126 dB [SRM350v3]
128 dB [SRM450v3]
Crossover Point
3 kHz
Dispersion (H x V)
90˚ x 80˚ [SRM350v3]
90˚ x 45˚ [SRM450v3]
High-Frequency Section
Compression Driver
1.4 in / 36 mm
Diaphragm Material
Titanium
Magnet Material
Ferrite
Low-Frequency Section
Woofer Diameter
10.0 in / 254 mm [SRM350v3]
12.0 in / 305 mm [SRM450v3]
Cone Material
Paper
Magnet Material
Ferrite
Power Amplifiers
System Power Amplification
Rated Power
500 watts rms
1000 watts peak
Low Frequency Power Amplifier
Rated Power
400 watts rms
800 watts peak
Rated THD
< 1%
Cooling
Convection
Design
Class D
High Frequency Power Amplifier
Rated Power
100 watts rms
200 watts peak
Rated THD
< 1%
Cooling
Convection
Design
Class AB
Input / Output
Channel 1
Mic-Line
8 k balanced
1/4" TRS, Wide-Z
™
1 M unbalanced
Channel 2
Mic-Line
8 k balanced
1/4" TRS, Wide-Z
™
1 M unbalanced
RCA
25 k unbalanced
Thru
Male XLR balanced
[Passive when the Ch 1 / Mix switch
is in the “out” (Ch 1) position]
[Active when the Ch 1 / Mix switch
is in the “in” (Mix) position]
Power
US detachable line cord
100 – 120 VAC, 50 – 60 Hz, 160W
EU detachable line cord
220 – 240 VAC, 50 – 60 Hz, 160W
AC Connector
3-pin IEC 250 VAC, 10 A male
Power Supply Type
Switchmode
Operating Temperature
0 - 40 ˚C
[extended ambient temperature]
32 - 104 ˚F
Safety Features
Input Protection
Peak and RMS limiting, power supply
and amplifier thermal protection
Display LEDs
Defeatable front power, input
signal/OL, speaker mode,
feedback destroyer on/off and
active filters, system limiter
Construction Features
Cabinet Polypropylene
Finish
Black, textured finish
Grille
Perforated metal with
weather-resistant coating
Fly Points
Three M10 x 1.5 x 20 mm [SRM450v3]
Monitor Angle
50˚ [SRM350v3]
40˚ [SRM450v3]