User’s
Guide
51
Parametric Equalizer Module
The Parametric Equalizer provides four bands
of equalization, with controls to adjust the gain,
center frequency, and quality factor (Q) for each
band.
Note:
EQ is rather like makeup: use it
wisely and tastefully for a subtle and
pleasing effect. Do not overdo it.
Nodes 1, 2, 3, and 4
In the graph display, there are four small node
circles, labeled 1 to 4. You can either use these
grab-points to adjust the bands, or use the sliders
below.
• Left-click on a node and drag your mouse to
adjust the frequency and gain; Q remains con-
stant.
• Right-click on a node and drag your mouse to
adjust the gain and Q; frequency remains con-
stant.
IN 1-4 buttons
Use these buttons to turn each band on or off.
The numbers correspond to the nodes in the
graphic display.
Nodes
IN
Shelf
Gain
Freq
Quality
Band 1
Band 2
Band 3
Band 4
HP/LP
Parametric Equalizer
Summary of Contents for Spike
Page 1: ......
