background image

S500 Series Loudspe

ak

ers

12

S500 Series Loudspeakers

S525

System

Type: 

 

Two-way, full-range loudspeaker

Frequency Range (–10 dB):    

51 Hz – 18 kHz

Horizontal Coverage Angle:    

90˚

Vertical Coverage Angle:  

 

50˚

Sensitivity (1W @ 1m):  

 

102.9 dB SPL

Nominal Impedance:  

 

8 ohms

Power Handling:    

600 watts continuous 

1200 watts program 

2400 watts peak

Crossover Frequency:  

 

2800 Hz

Transducers

Low Frequency:     

Two 15" / 381 mm woofers, vented

High Frequency:    

 

1" / 25 mm tweeter

Physical

Input Connectors:   

 

Two 1/4" TS jacks 

Two NL4 jacks, paralleled

Enclosure:  

 

Wood with textured black 

PVC vinyl covering 

Dimensions
 

Height:    

 

43.9 in / 1115 mm

 

Width:    

 

16.8 in / 427 mm

 

Depth:    

 

15.6 in / 396 mm

 

Weight:    

 

75 lb / 34 kg

S518S

System

Type:  

Subwoofer

Frequency Range (–10 dB):    

37 Hz – 220 Hz

Sensitivity (1W @ 1m):  

 

98.3 dB SPL

Nominal Impedance:  

 

8 ohms

Power Handling:    

450 watts continuous 

900 watts program 

1800 watts peak

Internal Low Pass Filter:   

120 Hz, 12 dB/octave

Transducers

Low Frequency:     

18" / 457 mm woofer, vented

Physical

Input Connectors:   

 

Two 1/4" TS jacks 

Two NL4 jacks, paralleled

Enclosure:  

 

Wood with durable black paint 

Dimensions
 

Height:    

 

23.9 in / 607 mm

 

Width:    

 

20.3 in / 516 mm

 

Depth:    

 

21.3 in / 541 mm

 

Weight:    

 

70 lb / 32 kg

Mounting: 

Pole-mount on top

LOUD Technologies Inc. is always striving to improve our products by incorporating new and improved materials, components, and manufacturing 
methods. Therefore, we reserve the right to change these specifications at any time without notice. “Mackie,” and the “Running Man” are registered 
trademarks of LOUD Technologies Inc. All other brand names mentioned are trademarks or registered trademarks of their respective holders, and 
are hereby acknowledged. ©2012 LOUD Technologies Inc. All Rights Reserved.

S525 Dimensions

S518S Dimensions

43.9 in /

1115 mm

13.3 in /

338 mm

16.8 in /

427 mm

15.6 in /

396 mm

23.9 in /

607 mm

15.5 in /

394 mm

20.3 in /

516 mm

21.3 in /

541 mm

Summary of Contents for S500 Series















Reviews: