Congratulations! Everything is now connected. Before will power everything up, set each of the level knobs on the back
of the TH-15As and the SRM-1801 to the center position (12 o’clock).
Also on the back of the TH-15As make sure the EQ switch is in the out position (off) and the EQ knobs are all set to
center position (12 o’clock).
Next, zero out the ProFX-8
1.
Turn down all knobs except the channel EQ and
pan knobs, and set all the faders fully down.
2.
Set all channel EQ knobs, pan knobs, and the graphic EQ sliders at their center detent.
3.
Set all buttons to the "out" position.
See Below:
