12
MR5mk3 / MR6mk3 / MR8mk3
MR5mk3 / MR6mk3 / MR8mk3
Appendix C: Technical Information
AC Power Requirements
US:
120 VAC, 60 Hz
Europe:
240 VAC, 50 Hz
Korea:
220 VAC, 60 Hz
Japan:
100 VAC, 50/60 Hz
Note:
MRmk3 monitors do not support multiple voltage
configurations. Make sure the voltage rating for your particular
model (as indicated on the rear panel near the IEC socket)
corresponds with your local AC mains voltage.
AC Connector:
3-pin IEC 250 VAC, 16 A male
Fuse:
115 VAC: T 1 AL / 250 V
230 VAC: T 500 mAL / 250 V [MR5mk3]
115 VAC: T 1.25 AL / 250 V
230 VAC: T 625 mAL / 250 V [MR6mk3]
115 VAC: T 2 AL / 250 V
230 VAC: T 1 AL / 250 V [MR8mk3]
Power Consumption:
90 watts with music, loud mix
7 watts quiescent (idle) [MR5mk3]
120 watts with music, loud mix
7 watts quiescent (idle) [MR6mk3]
150 watts with music, loud mix
10 watts quiescent (idle) [MR8mk3]
Physical Dimensions and Weight
MR5mk3:
Enclosure:
0.47 in / 12 mm thick MDF with
0.98 in / 25 mm MDF front panel
Dimensions:
Height:
11.3 in / 286 mm
Width:
7.8 in / 197 mm
Depth:
10.9 in / 276 mm
Weight:
12.1 lb / 5.5 kg
MR6mk3:
Enclosure:
0.47 in / 12 mm thick MDF with
0.98 in / 25 mm MDF front panel
Dimensions:
Height:
12.7 in / 323 mm
Width:
8.7 in / 222 mm
Depth:
12 in / 305 mm
Weight:
15.9 lb / 7.2 kg
MR8mk3:
Enclosure:
0.59 in / 15 mm thick MDF with
0.98 in / 25 mm MDF front panel
Dimensions:
Height:
15.8 in / 400 mm
Width:
10.9 in / 277 mm
Depth:
13.2 in / 336 mm
Weight:
23.8 lb / 10.8 kg
Damping:
Adiabatic batting [MR5/6/8mk3]
Disclaimer
LOUD Technologies is always striving to improve our products
by incorporating new and improved materials, components and
manufacturing methods. Therefore, we reserve the right to
change these specifications at any time without notice.
MRmk3 Specifications
Acoustic Performance
Frequency Response (-3 dB):
57 Hz – 20 kHz [MR5mk3]
46 Hz – 20 kHz [MR6mk3]
38 Hz – 20 kHz [MR8mk3]
Sound Pressure Level @ 1 meter, +4 dBu into Balanced Input:
102 dB SPL @ 1m [MR5mk3]
105 dB SPL @ 1m [MR6mk3]
107 dB SPL @ 1m [MR8mk3]
Maximum SPL Per Pair:
108 dB SPL @ 1m [MR5mk3]
111 dB SPL @ 1m [MR6mk3]
113 dB SPL @ 1m [MR8mk3]
Transducers
Low Frequency:
5.25 in / 133 mm hyperbolic
curved cone woofer [MR5mk3]
6.5 in / 165 mm hyperbolic
curved cone woofer [MR6mk3]
8.0 in / 203 mm hyperbolic
curved cone woofer [MR8mk3]
High Frequency:
Neodymium magnet driven
1 in / 25 mm silk dome tweeter
Amplifiers
Low Frequency Power:
30 watts, 4
Ω
load,
60 watts peak [MR5mk3]
40
watts,
4
Ω
load,
80 watts peak [MR6mk3]
55
watts,
4
Ω
load,
110 watts peak [MR8mk3]
High Frequency Power:
20 watts, 8
Ω
load,
40 watts peak [MR5mk3]
25
watts,
8
Ω
load,
50 watts peak [MR6mk3]
30
watts,
8
Ω
load,
60 watts peak [MR8mk3]
Type:
Monolithic IC, Class AB with
DMOS
power
stage
Electronic Crossover
Crossover Type:
24 dB/octave
Crossover Frequency:
3 kHz [MR5mk3]
3.25
kHz
[MR6mk3]
3
kHz
[MR8mk3]
Sensitivity:
+4 dBu at 300 Hz for full output
Input Impedance:
20 k
Ω
, balanced bridging;
10
k
Ω
unbalanced
Equalization
Low Frequency EQ:
+2 dB/+4 dB @ 100 Hz, shelving
High Frequency EQ: ±2 dB @ 3 kHz, shelving [MR5mk3]
±2 dB @ 3.25 kHz, shelving [MR6mk3]
±2 dB @ 3 kHz, shelving [MR8mk3]
