background image

HR84 MK

HR824 MK2

1.

  Read these instructions.  

2.

  Keep these instructions.

3.

  Heed all warnings.

4.

  Follow all instructions.

5.

  Do not use this apparatus near water.

6.

  Clean only with dry cloth. Use a non-scratch cloth to protect the finish.

7.

  Do not block any ventilation openings. Install in accordance with the 

manufacturer’s instructions.

8.

  Do not install near any heat sources such as radiators, heat registers, 

stoves, or other apparatus (including amplifiers) that produce heat.

9.

  Do not defeat the safety purpose of the polarized or grounding-type 

plug. A polarized plug has two blades with one wider than the other. 

A grounding-type plug has two blades and a third grounding prong. 

The wide blade or the third prong are provided for your safety. If the 

provided plug does not fit into your outlet, consult an electrician for 

replacement of the obsolete outlet.

10.

 Protect the power cord from being walked on or pinched particularly at 

plugs, convenience receptacles, and the point where they exit from the 

apparatus.

11.

 Only use attachments/accessories specified by the manufacturer.

12.

 Use only with a cart, stand, tripod, bracket, or table specified by the 

manufacturer, or sold with the apparatus. When a cart is used, use 

caution when moving the cart/apparatus combination to avoid injury 

from tip-over.

13.

 Unplug this apparatus during lightning storms or when unused for long 

periods of time.

14.

 Refer all servicing to qualified service personnel. Servicing is required 

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have 

fallen into the apparatus, the apparatus has been exposed to rain or 

moisture, does not operate normally, or has been dropped.

15.

 This apparatus shall not be exposed to dripping or splashing, and no 

object filled with liquids, such as vases, shall be placed on the apparatus.

16.

 This apparatus has been designed with Class-I construction and must 

be connected to a mains socket outlet with a protective earthing con-

nection (the third grounding prong).

17.

 Note that this apparatus is not completely disconnected from the AC 

mains service when the power switch is in the OFF position.

18.

 This apparatus does not exceed the Class A/Class B (whichever is 

applicable) limits for radio noise emissions from digital apparatus as 

set out in the radio interference regulations of the Canadian Department 

of Communications.

ATTENTION

 — 

Le présent appareil numérique n’émet pas de bruits 

radioélectriques dépassant las limites applicables aux appareils numériques de 

class A/de class B (selon le cas) prescrites dans le réglement sur le brouillage 

radioélectrique édicté par les ministere des communications du Canada.

19.

 Exposure to extremely high noise levels may cause permanent hearing 

loss. Individuals vary considerably in susceptibility to noise-induced 

hearing loss, but nearly everyone will lose some hearing if exposed to 

sufficiently intense noise for a period of time. The U.S. Government’s 

Occupational Safety and Health Administration (OSHA) has specified 

the permissible noise level exposures shown in the following chart.

  According to OSHA, any exposure in excess of these permissible limits 

could result in some hearing loss. To ensure against potentially danger-

ous exposure to high sound pressure levels, it is recommended that all 

persons exposed to equipment capable of producing high sound pres-

sure levels use hearing protectors while the equipment is in operation. 

Ear plugs or protectors in the ear canals or over the ears must be worn 

when operating the equipment in order to prevent permanent hearing 

loss if exposure is in excess of the limits set forth here. 

IMPORTANT SAFETY INSTRUCTIONS

WARNING — To reduce the risk of fire or 

electric shock, do not expose this apparatus 

to rain or moisture.

Duration Per Day 

 Sound Level dBA, 

Typical 

  In Hours 

Slow Response 

Example

  8 

90 

Duo in small club 

 6 

92 

   

95 

Subway Train 

97 

100 

Very loud classical music 

1.5 

102 

105 

Home theater (loudest peaks) 

0.5  

110 

0.25 or less  115 

Loudest parts at a rock concert

PORTABLE CART WARNING

Carts and stands - The

Component should be used

only with a cart or stand

that is recommended by

the manufacturer.

A Component and cart

combination should be

moved with care.  Quick

stops, excessive force, and

uneven surfaces may cause

the Component and cart

combination to overturn.

CAUTION    AVIS

RISK OF ELECTRIC 

SHOCK 

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED PERSONNEL

ATTENTION: POUR EVITER LES RISQUES DE CHOC

ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE.  AUCUN

ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER.  CONFIER

L'ENTRETIEN AU PERSONNEL QUALIFIE.

AVIS: POUR EVITER LES RISQUES D'INCENDIE OU

D'ELECTROCUTION, N'EXPOSEZ PAS CET ARTICLE 

A LA PLUIE OU A L'HUMIDITE

   The lightning flash with arrowhead symbol within an equilateral 

triangle is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure, that may be 

of sufficient magnitude to constitute a risk of electric shock to persons.

   Le symbole éclair avec point de flèche à l'intérieur d'un triangle 

équilatéral est utilisé pour alerter l'utilisateur de la présence à 

l'intérieur du coffret de "voltage dangereux" non isolé d'ampleur 

suffisante pour constituer un risque d'éléctrocution.

   The exclamation point within an equilateral triangle is intended to 

alert the user of the presence of important operating and maintenance 

(servicing) instructions in the literature accompanying the appliance.

   Le point d'exclamation à l'intérieur d'un triangle équilatéral est 

employé pour alerter les utilisateurs de la présence d'instructions 

importantes pour le fonctionnement et l'entretien (service) dans le 

livret d'instruction accompagnant l'appareil.

Summary of Contents for HR824 MK2





















Reviews: