background image

11

Owner’s Manual

Owner’

s Manual

Repair

Service for Mackie products is available at a factory-
authorized service center. Service for Mackie products 
living outside the United States can be obtained through 
local dealers or distributors.

If your HM-54 needs service, follow these instructions:

1.  Review the preceding troubleshooting suggestions. 

Please.

2.  Call Tech Support at 1-800-898-3211, 7 am to 5 pm 

PST, to explain the problem and obtain a Service 
Request Number. Have your HM-54’s serial number 
ready.  

You must have a Service Request Number before 
you can obtain factory-authorized service.

3.  Keep this owner’s manual and the detachable 

linecord. We don’t need them to repair the HM-54.

4.  Pack the preamplifier in its original package, 

including endcaps and box. This is 

VERY 

IMPORTANT

. When you call for the Service 

Request Number, please let Tech Support know if 
you need new packaging. 

Mackie is not responsible 

for any damage that occurs due to non-factory 
packaging.

5.  Include a legible note stating your name, shipping 

address (no P.O. boxes), daytime phone number, 
Service Request Number, and a detailed description 
of the problem, including how we can duplicate it.

6.  Write the Service Request Number in 

BIG PRINT

 on 

top of the box. Units sent to us without the Service 
Request Number will be refused.

7.  Tech Support will tell you where to ship the 

preamplifier for repair. We suggest insurance for all 
forms of cartage.

8.  We’ll try to fix the HM-54 within three to five 

business days. Ask Tech Support for the latest 
turn-around times when you call for your Service 
Request Number. The HM-54 must be packaged in 
its original packing box, and must have the Service 
Request Number on the box. Once it’s repaired, we’ll 
ship it back the same way in which it was received. 
This paragraph does not necessarily apply to non-
warranty repair.

 

Note:

 You must have a sales receipt from an 

Authorized Mackie Dealer to qualify for a warranty 
repair.

Need Help?

You can reach a technical support representative  

Monday through Friday  

from 7 AM to 5 PM PST at:

1-800-898-3211

After hours, visit www.mackie.com and click Support,  

or email us at: [email protected]

Summary of Contents for HM-54

















Reviews: