Active, High-Output Subwoofer
FUSSION 1800SA/1800S
oF 6 PAGES
4
O F 4 P A G E S
Architect’s and Engineer’s Specifi cations
The active subwoofer loudspeaker system shall incorpo-
rate two 18-inch low-frequency (LF) transducers each mounted
within an individual enclosure. Each enclosure shall be con-
structed using multi-ply wood and tuned for optimum low-
frequency response. System frequency response shall vary no
more than ±3 dB from 38Hz to 120Hz measured on axis. The
loudspeaker shall incorporate a low frequency amplifi er sys-
tem capable of delivering 2500 watts over a frequency range
of 20Hz to 150Hz. The amplifi er system shall be mounted on
an aluminum heat sink suspension mounted within one of the
subwoofer enclosures. Each enclosure shall have a rectan-
Electronic fi les for this product available at:
www.mackie.com
This Specifi cation Sheet FUSSION1800.PDF
Architects’ & Engineers’ Specifi cations FUSSION1800AE.TXT
Quick-Start Manual FUSSION1800QS.PDF
Owner/Operator’s Manual FUSSION1800ML.PDF
Applications Guide FUSSION1800AG.PDF
CADD fi les FUSSION1800.DXF
EASE data FUSSION1800.EAS
Mackie Designs continually engages in research related to product improvement. New material, produc-
tion methods, and design refi nements are introduced into existing products without notice as a routine
expression of that philosophy. For this reason, any current Mackie Designs product may differ in some
respect from its published description, but will always equal or exceed the original design specifi cations
unless otherwise stated. ©1999-2002 Mackie Designs Inc. All rights Reserved.
part no. 091-226-00 Rev A
gular shape and shall incorporate two handles on each side.
The subwoofer system will feature a XLR input connector and a XLR
loop-through signal connector, a speaker-level EP-type connector
designed to power the passive subwoofer cabinet, and “ON”
and “Protection” mode LED indicators. The front of the loud-
speaker shall be covered with a powder-coated, weather-resistant
perforated steel grille.
The active subwoofer loudspeaker system shall be the
Mackie Designs FUSSION 1800SA/1800S.
FUSSION 3000
FUSSION 3000
FUSSION 1800SA
FUSSION 1800SA
FUSSION 1800S
MIXER
FUSSION 3000 High Pass Switch is in the “ON” position
FUSSION 1800S
FUSSION 3000 High Pass Switch is in the “ON” position
www.mackie.com
16220 Wood-Red Road NE, Woodinville, WA 98072 USA
888.337.7404, fax 425.487.4337, [email protected]
UK
+44.1268.571.212, fax +44.1268.570.809, [email protected]
ITALY
+39.0522.354.111, fax +39.0522.926.208, [email protected]
FRANCE
+33.3.85.46.91.60, fax +33.3.85.46.91.61, [email protected]
GERMANY
+49.2572.96042.0, fax +49.2572.96042.10, [email protected]
SUBWOOFER
FUSSION 1800SA/1800S
