6
dXb.200
dXb.200
7
Quick-Start Guide
Quick
-Star
t Guide
14. IEC Power Receptacle
There are two power receptacles on the dXb,
one to provide power to the dXb and the other to
connect to another device and provide power to it.
These are standard 3-prong IEC power connectors.
Connect the detachable linecord (included with your
dXb) to the male power receptacle, and plug the
other end of the linecord into an AC outlet with the
correct voltage for your particular dXb.
To connect another device to the female IEC
power receptacle, you need a power cord with a
male IEC power connector on one end, and a female
IEC power connector on the other end. These can be
purchased at most electronic supply stores.
15. Power Switch
This one is self-explanatory. When the POWER
switch is turned ON, power is supplied to the dXb
and it boots up. When turning off the dXb, you
should select Shutdown from the File menu. At the
end of the shutdown procedure, the touchscreens
go blank, indicating that it is okay to turn off the
power switch.
��������������
����������������
���������
More Connections
There are even more connections available behind
the removable panel on the back of the dXb. These
are connections to the motherboard, so the only
ones we'll talk about are the mouse and keyboard
connections, which you can use if you don't have a
USB mouse and keyboard.
To access the connectors:
1. First, turn off the dXb (select File > Shutdown
and then turn off the power switch).
2. Use a phillips screwdriver to remove the eight
screws securing the panel to the chassis.
16. Mouse
This 6-pin miniDIN connector is used to connect a
PS/2-style mouse.
17. Keyboard
This 6-pin miniDIN connector is used to connect a
PS/2-style keyboard.
MOUSE
KEYBOARD
Summary of Contents for DXB 200 - CONNECTIONS
Page 1: ...QUICK START GUIDE dXb 200...
