6
Mackie Digital X Bus
Getting Inside the Digital X Bus
7
Mackie Digital X Bus
Getting Inside the Digital X Bus
Unscrew both the top and bottom holding screws for each video cable connector. Make sure
that both video cable ends are loose and free from obstruction.
Removing the Rear Chassis
Locate all the black Philips Head screws that lie along the outer-most edge of the rear chassis,
as shown in Figure J (below):
Using your small Small #2 Philips Head screwdriver, carefully remove each of the outer-most
screws around the entire edge of the rear panel. Do not remove any screws that lie inside the
outer most edge as shown in Figure K (below):
Figure J
Figure K
