DRM
18S 2000W
18" P
rofes
sional P
ow
er
ed Subw
oofer
4
DRM18S 2000W 18” Professional Powered Subwoofer
Getting Started
Introduction
The DRM18S 2000W 18” Professional Powered Subwoofer
delivers class-leading power via an ultra-efficient Class-D
amplifier with next-gen protection and Power Factor
Correction technology provides peak low-end performance
when you need it.
Advanced Impulse™ DSP provides acoustic correction
via precision tuned FIR filters for accurate, punchy sound
typically experienced only with massive touring systems.
The DRM Control Dashboard™ features a high-contrast,
full-color display for quick access metering, crossover
settings, and more.
Designed to match the rest of the DRM Series perfectly,
the DRM18S is stackable, flyable, and is equipped with
a pole cup for maximum versatility.
How to Use This Manual:
After this introduction, a getting started guide will help
you get things set up fast. The hookup diagrams show
some typical DRM18S subwoofer setups.
This icon marks information that is critically
important or unique! For your own good, read and
remember them...it is a good idea to pay special
attention to these areas in the Owner’s Manual
marked with the “VERY IMPORTANT” hand icon.
There’s an illustration of a microscope,
so, of course, you’re going to get more
detailed information when you see this little
guy. There are explanations of features
and practical tips listed here.
It’s a good idea to pay attention to text displayed
next to a note icon, as this icon draws attention
to certain features and functions relating to the
usage of the DRM18S.
The following steps will help you set up the DRM18S quickly.
1. Make all initial connections with the power switches OFF
on all equipment. Make sure the master volume, level and gain
controls are all the way down.
2. Connect the outputs from the mixing console (or other
signal source) to the inputs on the DRM18S, then connect
the high pass outputs from the subwoofer to the inputs
of the loudspeakers.
3. Push the line cord securely into the subwoofer’s /
loudspeaker’s IEC connectors and plug the other ends into
grounded AC outlets. The subwoofer/loudspeaker may accept
the appropriate voltage as indicated near the IEC connector.
4. Turn the mixer (or other signal source) on.
5. Turn the subwoofer on.
6. Turn the loudspeakers on.
7. Make sure the subwoofer’s channel levels are set
to (or near) 0 dB.
8. Make sure the loudspeaker’s channel levels are set
to (or near) 0 dB.
9. Start the signal source and raise the mixer’s main L/R
fader up to a comfortably loud listening level.
Things to Remember:
• Never listen to loud music for prolonged periods. Please see
the Safety Instructions on page 2 for information on hearing
protection.
• As a general guide, the mixer (or other signal source) should
be turned on first, DRM18S subwoofer next, and loudspeakers
last. As such, the loudspeakers should also be turned off first,
followed by the DRM18S, then the mixer. This will reduce
the possibility of any turn-on or turn-off thumps and other
noises generated by any upstream equipment from coming
out of the speakers.
• Save the shipping boxes and packing materials! You may
need them someday. Besides, the cats will love playing
in them and jumping out at you unexpectedly. Remember
to pretend like you are surprised!
• Save your sales receipt in a safe place.
Please write the serial numbers here for future reference
(i.e., insurance claims, tech support, return authorization,
make dad proud, etc.)
Purchased at:
Date of purchase:
