D8B Manual • Chapter 1 • page 20
12. Remove the 2nd floppy disk when prompted and
power down the console power supply, then
power back on.
13. You now have the updated D8B operating
system installed.
14. Make sure you read the release notes. They
have important info about this upgrade.
Note:
Repeat the above procedure with the
Demo_Plugins_3xxx_Mac.sea
file to install the
plug-in update. After updating the plug-ins
software on the D8B, you
must
perform the “Erase
UFX Memory” and “Upgrade UFX Cards”
procedures (under Windows in the upper menu
bar) to upgrade the UFX cards that are installed in
the D8B.
Note to Macintosh USB Floppy drive users:
Apple's Disk Copy program will not work
using the above method with a USB floppy drive
because the menu option "Make a Floppy..." will
not be available. You must use Aladdin Systems'
ShrinkWrap program available for purchase and
trial download from http://www.aladdinsys.com/
shrinkwrap/index.html. Once you have
ShrinkWrap installed, substitute these steps for
steps 3-6 in the above directions.
3. Launch ShrinkWrap.
4. Select "Write Image back to Disk..." from the
Image menu (command-B).
5. Locate the image file labeled
d8b3xxxx Install
1.img
that was extracted onto your hard drive.
6. ShrinkWrap will prompt you to insert a floppy
disk into the floppy disk drive.
Summary
This chapter has been specifically designed to
help you understand the basic concept of the Digital
8•Bus architecture. The following two chapters
describe the physical surface controls and the
software features and capabilities. The last chapter
describes specific applications as they pertain to
unique recording tasks and needs.
Chapters 2 and 3 support what you’ll encounter
in Chapter 4. Feel free to jump ahead, but keep in
mind that you’ll probably need to use these second
two chapters as a reference for the terms and
controls that are new to you.
