background image

12

Multimedia Monitors w/ Bluetooth

®

Multimedia Monit

ors w

/ Bluet

ooth

®

Appendix B: Technical Information

Bluetooth Information

Bluetooth 

Protocol 

  3.0

Bluetooth Function  

 

Audio Streaming

Construction Features

Basic 

Design 

  Rectangular

Enclosure Construction 

 

Solid MDF

Finish 

   Black 

vinyl 

wrap

Handles   

 

 

At <10 lb each, there  

 

 

 

 

is no need for handles!

Port 

Configuration 

  Custom-tuned 

 

    rear 

port 

tube

Damping 

   Adiabatic 

batting

Display LED (Front) 

 

Power ring  

    (around 

volume 

knob)

Operating Temperature 

 

0 – 40 ˚C 

    32 

– 

104 

˚F

Physical Dimensions and Weight

CR4BT

          Dimensions 
 

Height    

8.8 in / 224 mm 

 

Width    

6.1 in / 155 mm 

 

Depth    

7.3 in / 185 mm 

 

Weight    

12.0 lb / 5.4 kg [pair]

CR5BT

          Dimensions 
 

Height    

10.2 in / 259 mm 

 

Width    

6.9 in / 175 mm 

 

Depth    

9.0 in / 229 mm 

 

Weight    

15.0 lb / 6.8 kg [pair]

Disclaimer

LOUD Technologies is always striving to improve our products 
by incorporating new and improved materials, components and 
manufacturing methods. Therefore, we reserve the right to 
change these specifications at any time without notice.

The Running Man is a registered trademark of LOUD  
Technologies Inc. This manual also contains names and  
marks of other companies which belong to those respective 
companies, and are hereby acknowledged.
 
©2015 LOUD Technologies Inc. All Rights Reserved.

CRBT Series Specifications

Acoustic Performance

Frequency Response (–3 dB)  

70 Hz – 20 kHz [CR4BT]

 

 

 

 

60 Hz – 20 kHz [CR5BT]

Frequency Response (–10 dB) 

60 Hz – 20 kHz [CR4BT]

 

 

 

 

50 Hz – 20 kHz [CR5BT]

Maximum SPL Peak Per Pair  

100 dB [CR4BT]

    103 

dB 

[CR5BT]

Crossover Frequency  

 

3 kHz

Transducers

Low Frequency  

 

4.0 in / 102 mm polypropylene- 

   coated 

woofer 

[CR4BT]

 

 

 

5.0 in / 127 mm polypropylene- 

   coated 

woofer 

[CR5BT]

High Frequency    

0.75 in / 19 mm silk dome tweeter

Amplifiers

Rated Power 

 

28 watts rms  

   50 

watts 

peak

Design 

  Class 

AB

Input / Output

Input Type 

 

Balanced / unbalanced 1/4" TRS,  

   unbalanced 

RCA 

[Rear] 

   1/8" 

TRS 

[Front]

Input Impedance    

20 k

Ω

, balanced bridging;  

   10 

k

Ω

 unbalanced

Output Type 

 

1/8" stereo headphones [Front]

Power Requirements

United States 

 

 

120 VAC, 60 Hz 

Europe   

 

 

220–240 VAC, 50/60 Hz 

Korea 

 

 

 

220 VAC, 60 Hz 

Japan 

 

 

 

100 VAC, 50/60 Hz

Power Consumption 

72 watts with music, loud mix

Note:

 CRBT Series monitors do not support multiple voltage  

configurations. Make sure the voltage rating for your particular 
model (as indicated on the rear panel) corresponds with your 
local AC mains voltage.

Summary of Contents for CR4BT

















Reviews: